.svg)
.svg)
.svg)
Electromagnetic flowmeters operates based on Faraday’s law of electromagnetic induction and is designed for highly accurate volume flow measurement of conductive liquids in closed pipelines. It is ideal for measuring corrosive fluids such as acids, alkalis, and saline solutions. Thanks to its robust design and chemical resistance, this flowmeter is widely used across industries including petrochemical, metallurgy, textile, food and beverage, pharmaceuticals, pulp and paper, as well as municipal water, wastewater, and environmental engineering.
✓ Chemical Industry
✓ Metallurgy
✓ Paper Industry
✓ Food & Beverage
✓ Sewage Treatment
✓ Phamaceutical
✓ Water Trestment
✓ Printing & Dyeing
Just fill in the form below — it helps us establish a baseline to find the perfect solution for you. We will reach out to you shortly after submission
Need help?
Just contact us anytime, we are here for you!
Type
Compact/Remote/Insertion
Accuracy
±0.5%-±2.5%
Connection Size range
DN10-DN2000
Connection type
Flange/Thread/Wafer/Clamp
Pressure Range Medium
0,6 MPa-6,3MPa
Temperature Range Medium
Neoprene: -10…+60℃
Polyurethane: -10…+60℃
PTFE/FEP: -10…+120℃
PFA: -10…+180℃
Temperature Range Ambient
-10℃ - 60℃
Communcation capability and types
RS-485 / HART / RS-232 / Current (4-20 mA) / pulse / frequency / state switch
Power supply capability and types
230 VAC 50&60Hz / 24 VDC / 12 VDC
IP grade
IP65 / IP68
Lining material
Neoprene (CR) / Polyurethane (PU) / Polytetrafluoroethylene / PTFE (F4) / PFEP (F46) / PFA / Chloroprene Rubber
Electrode Material
316L Stainless Steel / Hastelloy C / Hastelloy B / Ti / Ta / Pt
Body material
Carbon steel / 304 Stainless Steel / 316 Stainless Steel
Lining material
Property
Max Temp.
Applicable medium
Neoprene
Average abrasiveness, good for acidic, alkali, and salts solutions
<60℃
Water, sea water, industrial water
Polyurethane
With very good antiabrasiveness; No good foracid, alkali solutions
<60℃
Slury like mine slury, paper slurry
Teflon
Stable chemical property, proof against the corrosion of boiling hydrochloric acid, sulphuric acid, nitric acid and aqua regia, concentratedalkali
<100℃
Strong corrosive acid, alkali solution
FEP(F46)
Same chemical properties as F4, but with better tensile strength and pressure resistance
<120℃
Corrosive acidic, alkali, and salts solutions
PFA
Same chemical properties as F46, but with better tensile strength and pressure resistance.
<180℃
Corrosive acidic, alkali, and salts solutions
org.nr: 935 924 782
.png)
.png)
